Commit 621670bb authored by Jacek Lebioda's avatar Jacek Lebioda
Browse files

fix: corrected share links

parent 8f0f5ccb
......@@ -4,6 +4,7 @@ permalink: /internal/lab/dishwasher-utilization-and-maintenance/
shortcut: lab:dishwasher-utilization-and-maintenance
redirect_from:
- /cards/lab:dishwasher-utilization-and-maintenance
- /internal/cards/lab:dishwasher-utilization-and-maintenance
---
# Dishwasher utilization and maintenance
......@@ -160,4 +161,4 @@ Utilization of the Miele dishwashers on the 5th floor of BT1 and on the 1st floo
6. Then, pull out the micro-fine filter together with the flat filter
7. Clean the filter
8. Replace the filters by performing the above steps in the reverse order
9. Ensure that the filters sit flat in the base of the wash cabinet
\ No newline at end of file
9. Ensure that the filters sit flat in the base of the wash cabinet
......@@ -4,6 +4,7 @@ permalink: /internal/lab/personal-alert-safety-system/
shortcut: lab:personal-alert-safety-system
redirect_from:
- /cards/lab:personal-alert-safety-system
- /internal/cards/lab:personal-alert-safety-system
---
# Personal alert safety system (PASS)
......@@ -193,4 +194,4 @@ If the device is configured to require a periodic check-in, a low battery shutdo
|----|------|---------|----------------|
|**Pending alarm**|Slow alarm pattern|Single repeating vibration|Alarm light array slow flash (red)|
|**High alarm**| Fast alarm pattern| Double repeating vibration|Alarm light array fast flash (red)|
|**Low battery**|Single beep once every 5 minutes|No vibration|Charge light, single flash once every 5 minutes|
\ No newline at end of file
|**Low battery**|Single beep once every 5 minutes|No vibration|Charge light, single flash once every 5 minutes|
......@@ -4,6 +4,7 @@ permalink: /internal/lab/utilization-of-balances/
shortcut: lab:utilization-of-balances
redirect_from:
- /cards/lab:utilization-of-balances
- /internal/cards/lab:utilization-of-balances
---
# Utilization of balances
......@@ -74,4 +75,4 @@ There are such balances on the 5th floor in BT1 and on the 2nd floor in BT2.
* When the crown is removed, carefully wipe with a damp cloth around the weighing pan
* Carefully place the crown back
* Always wipe the area around the balance with 70 % ethanol to remove any substance
* Spoons: wash them with a mild detergent and water
\ No newline at end of file
* Spoons: wash them with a mild detergent and water
......@@ -4,6 +4,7 @@ permalink: /internal/lab/utilization-of-pH-meter/
shortcut: lab:utilization-of-pH-meter
redirect_from:
- /cards/lab:utilization-of-pH-meter
- /internal/cards/lab:utilization-of-pH-meter
---
......@@ -92,4 +93,4 @@ The calibration standard solutions are of pH 4, 7 and 10.
4. Contact the quality assistant if the logbook is full.
5. Would you notice any issue with the instrument, create a ticket.
\ No newline at end of file
5. Would you notice any issue with the instrument, create a ticket.
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment